Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focused entirely on one specific repair: a non-functioning three-point hitch on a Kioti RX7320 with only 97 hours. The video walks through the fix, removing the seat, pulling the valve with two 12mm bolts, freeing a debris-stuck spool, replacing O-rings, and reinstalling. It's brief and practical rather than deep, but RX7320 owners facing a dead three-point hitch will find the exact steps they need.
Posted by the J Hilti channel, with no channel description available to indicate perspective or affiliation.
A chunk of dirt or debris got into the valve spool, causing it to get stuck so it would not move up or down.
Remove the seat, then pull the valve out, which is held by two 12-millimeter bolts after taking off an arm.
Replace the O-rings before reinstalling the valve back into the tractor.
