Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An unedited owner walkthrough of the aftermath of a dual rear remote install on a Bad Boy 5045H, not the install itself. The creator missed videoing the actual process but walks through the key pitfall he hit: a misaligned O-ring causing a hydraulic leak, plus a tip about centering the spools so they clear the three-point arms. Confirms the OEM TYM kit fits the 5045H, 5055, and TYM 4820, and notes he sourced it from Bad Boy Garage. Most useful for owners doing the same install who want a heads-up on where things can go wrong.
An owner-operator sharing a casual, unedited first-person account of work done on their own tractor.
A misaligned O-ring on the valve plate caused hydraulic fluid to shoot out when the tractor was started. Pulling the plate off, reseating the O-ring, and reinstalling fixed the leak.
Yes, the OEM TYM kit works perfectly on the Bad Boy 5045, 5055, or TYM 4820, though some minor adjustment to hose and spool position may be needed.
Adjust the spools toward the center so they clear the three-point arms, since the kit ships with spools angled toward the tire, which can interrupt arm clearance when raised.
Don't overtighten; tighten in a crisscross pattern, then give one more quarter turn, to avoid pinching or squeezing the O-rings out of their sockets.
