Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-time DIY install, not a review: an owner installs the linked pedal kit (and cruise control kit together) on a Bobcat CT2025/Kioti CK2610, pulling the steering wheel, dash, and floor, and reassembling hydro pedal linkages step by step. It covers part numbers, torque notes, an odd full-throttle-forward/half-throttle-reverse quirk, and honest timing (3-3.5 hours vs. the claimed 2). Best for owners planning this exact install themselves.
Posted by the Gaining Ground channel, an owner doing the install themselves and documenting it hands-on rather than promoting a product.
The paperwork says about two hours, but it took over three hours, maybe three and a half. Doing it again, the owner estimates two to two and a half hours.
Yes. You have to pull the steering wheel, the dash, and the floor, then pull apart the hydro step pedals to install the linked pedal kit.
The owner checked the linkages and instructions and did everything right but still got full throttle forward and only half throttle reverse, possibly by design.
The cruise control kit is 7378640 and the linked pedal kit is 73786650.
| Kioti CK2610 | Bobcat CT2025 | |
|---|---|---|
| PTO horsepower | CK2610: 21.7 hp; CK2610 HST: 21.5 hp | 21.8 hp |
| Loader lift capacity | KL2610: 2,110 lb (at pivot pin) | 2,575 lb (at pivot pin) |
| 3-point lift capacity | Not Published | Not Published |
| Hydraulic flow | Not Published | 6.9 gpm |
