Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full DIY installation walkthrough of a Coyote-brand third function valve kit on a CK2610, unboxing every component and following each step: removing the tire, fender, and covers, mounting the valve box under the tractor, running and connecting A/B hydraulic hoses, installing the new shifter, and adding the front loader bracket and quick-disconnects, finishing with a grapple test. Best for owners planning this exact install who want a real hands-on reference.
Posted by an owner (Double D's Life) documenting their own DIY install rather than a dealer or professional installer.
A complete new shifter with integrated wiring, multiple hoses, relays, a valve housing and bracket, fittings, O-rings, and an owner's manual with a parts list.
Remove the tire and rim, then remove the fender (about nine bolts and two nuts), then remove the plastic cover over the area near the hydraulic pipe.
The valve box is mounted underneath the tractor using two bolts, a flat washer, and a lock nut, with a housing installed first to protect the valve.
Yes, the tire is heavier than expected, so anyone who has never removed a tractor tire should be prepared for the weight.
