Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on 50-hour service video specifically for the RCK60-32 mower deck on a Kubota B2601, not the tractor itself. It covers removing and reinstalling the deck, changing gearbox oil (with actual quantities discussed), greasing spindles/U-joints/gauge wheels, and inspecting blades after mowing gravelly ground. Useful for existing B2601 owners doing their own deck maintenance rather than shoppers researching the tractor.
An owner-operator maintaining his own B2601 and mower deck, sharing practical DIY service steps rather than a dealer sales pitch.
Level the deck, remove the lower plug, drain, then refill with 80W90 gear oil through the check plug until it starts coming out, meaning it is full.
Grease the center and right side spindles, the idler pulley, tensioner pivot, front drive shaft U-joints, and front gauge wheel fittings; gauge wheels get greased every mow.
Raise the deck, pull pins on the gauge wheels and ramps, disconnect the PTO and front linkage, then reverse the process to reinstall, rotating the PTO shaft slightly to engage the splines.
The creator was surprised the blades were not very chewed up after grinding over gravel, saying they were not too bad and only needed minor touch-up.
