Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A short, practical how-to focused entirely on removing the seat from a Mahindra 4550. The creator walks through all four bolts, calling out the two rear bolts as the tricky ones and explaining the exact seat-position trick, move it forward, then back about an inch and a half, needed to get a ratchet in. No frills, no specs talk; useful specifically if you need to pull this seat and aren't sure how.
Posted by the hinckleydaniel channel, which has no description, suggesting an owner sharing a quick fix from personal experience rather than a dealership or professional channel.
Remove four bolts total. The two front bolts are easy. For the two rear bolts, remove the rubber stoppers and curtain, then move the seat forward and back about an inch and a half so a ratchet fits in the recess.
The two rear bolts are tricky because you must position the seat precisely, too far back hits a bar in front, too far forward blocks access, so the ratchet can reach the recess.
The transcript mentions using a ratchet to reach the recessed rear bolts after moving the seat into the correct position.
