Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, over-two-days walkthrough of a real 500-hour service on an owner's own Mahindra 2638, not a dealer overview. It covers engine oil, HST hydraulic fluid (8.5-9 gallons), spin-on and suction filters, fuel filter, air filters, and 19 grease fittings on the backhoe, plus a DIY fix routing hydraulic hoses away from rub points. Best for owners doing their own major service intervals.
Posted by the Tim's on the move off grid channel, an owner-operator documenting maintenance on their own tractor rather than a dealer or reviewer.
The HST transmission holds about eight and a half to nine gallons, according to the owner during the fluid change.
The owner found 19 grease fittings on the backhoe, noting the manual does not specify an exact number to find.
The owner zip tied the hoses together and used welding wire to suspend them near the seat so they move without touching anything.
It covers engine oil, HST hydraulic fluid, spin-on and suction filters, fuel filter, air filters, and greasing fittings on the backhoe.
