Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is Kubota's official step-by-step guide to changing oil and the filter on the BX2380, walking through draining the oil, replacing the filter, refilling, and checking for leaks with the dipstick. It also states the maintenance intervals: first change at 50 hours, then every 200 hours. It's a short procedural how-to, not a review, best suited for owners performing this specific service themselves.
Posted by the Kubota Tractor Corporation channel, so it's an official manufacturer maintenance tutorial rather than an independent review.
The first oil change is due at 50 hours, and after that it should be done every 200 hours.
You need an oil filter wrench, a selection of hand tools, a drain pan, and shop towels.
Put a film of clean engine oil on the rubber seal, turn it clockwise until it contacts the base, then turn an additional half turn by hand.
Run the engine for a minute, check for leaks, shut it off, then check the oil level with the dipstick and correct as necessary.
