Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step service walkthrough filmed while actually performing the work on an LX2610. The technician covers engine oil drain (both drain plugs noted), oil filter swap, air filter replacement, hydraulic suction filter, and fuel filter change, with specific details like the 4.2-quart oil capacity, torque feel for drain plugs, dipstick technique, and a candid vacuum-pump tip that backfired. Best for owners doing their first service on this model.
Posted by the Messick's Farm Equipment channel, which appears to be a dealership, so this is a shop-floor walkthrough rather than an independent owner's perspective.
Kubota states the LX2610 takes 4.2 quarts, just over a gallon, for an engine oil change.
They do not need to be very tight, just snugged up to a stop point with a small final bump.
It has two drain plugs because the four wheel drive drive shaft separates the pan, so both must be drained to get all the oil out.
The technician tried using a shop vacuum over the fill hole, but it actually sucked fluid into the vacuum instead of preventing loss.
