Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses specifically on first-time assembly of the three-point hitch on a John Deere 2025R Gen 2, walking through each component in order: draft links, top link, lift links, and stabilizer/sway assembly. The creator shares practical workarounds discovered without instructions, including how to tell left from right draft links and a bungee-cord trick for aligning the stabilizer. Most useful to new 2025R owners doing this assembly for the first time.
An owner-operator sharing a first-time installation experience on their own tractor, with no apparent dealership or brand affiliation.
Measure from the center hole since one side is slightly longer. Use the short side toward the back with welds facing inward, marking ends with tape, red for right, green for left.
Slide it on with the small bend pointing outward, hold the lift and draft arms together to get the bolt through, then spin on the nut and tighten until it bottoms out.
Use the supplied bungee cord to keep the assembly together, making it easier to tighten the nuts down once everything lines up.
