Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, real-time walkthrough of a full hydraulic fluid and filter change on an L2800 4WD at 424 hours, filmed by the owner in his own shop. It covers tool sizes (14mm, 22mm, 24mm), drain plug locations, both filters, refill quantity (about 6.2 gallons), and checking the sight glass afterward. Useful for owners planning to do this exact 400-hour service themselves.
An owner-operator documenting DIY maintenance on his own tractor, partly as a reference for himself to reuse later.
According to the book, about 6.2 US gallons or 23.5 liters for a four-wheel drive L2800.
A 14mm socket for the rear axle drain plug, a 22mm for one drain, and a 24mm for the big drain plug on the base.
Put fresh hydraulic fluid on the gasket, thread it on by hand until it stops, then turn it about a half turn further.
The owner's manual calls for this service every 400 hours, and this change was done at 424 hours.
