Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real hands-on service session on a working M6060 with over 1400 hours, not a dealer walkaround. The owner drains and refills hydraulic fluid (trying a non-Kubota UDT2 oil), changes engine oil and filter, air filter (with part numbers), fuel/water separator, and crankcase ventilation filter, citing actual hour intervals and his own maintenance schedule versus book recommendations. Best for owners doing their own service and wanting real-world timing and part numbers.
Posted by K&H Tractors, an owner-operator documenting DIY maintenance on their own tractor rather than a dealer or sponsored channel.
The owner tried Sten Shield oil formulated specifically for UDT2/UDT systems, not a universal oil. He felt comfortable trying it since it is cheaper, but said he would drain it if the clutch or tractor acted wrong.
The oil filter part number is H1C032430, and the owner notes it should also be the same for the M7060.
The book says every 600 hours, but the owner changed his at 700 hours initially and is changing it again now at over 1400 hours.
The inner filter element part number is 3A111-19130, and the outer element part number is 9026110.
