Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This video focuses specifically on mounting an RJ Designs chainsaw holder to an RK25/TYM T25, where the factory-installed lights and speaker system on the ROPS complicate the standard installation. The owner works through multiple placement options in real time, ROPS sides, front loader bracket, makes a mid-video hardware run for longer bolts, and lands on a final front-loader-arm mount. Useful for RK25 owners dealing with the same ROPS obstacle.
Posted by the TNT - Try New Things channel; the host appears to be an owner-operator sharing a hands-on DIY install from their own property.
After testing ROPS side and angled spots, the owner mounted it to the front loader bracket, lowered to the top two attachment points for clearance and easy reach.
No. In the final lowered position there is still lots of travel room before hitting the bolt, and grease points can be reached without removing the mount.
The owner used a Stihl MS170 with a 16-inch bar and set the PVC guide bars to the narrowest bar position available.
| Rural King RK25 | TYM T25 | |
|---|---|---|
| PTO horsepower | 18.3 hp | 18.3 hp |
| Loader lift capacity | L85: 2,059 lb (at ground level, pivot pin) | TL25: 2,059 lb (at pivot pin, ground level) |
| 3-point lift capacity | 1,534 lb | 1,551 lb |
| Hydraulic flow | 4.18 gpm | 4.2 gpm |
