Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow, task-specific how-to: installing and removing the drive-over mower deck on a Kubota B2301, demonstrated step-by-step by a second presenter (Caleb) while Chris narrates. It covers cutting-height setup, PTO shaft pins, front bracket pins, and driving the tractor over the deck to connect or disconnect it, including a candid note about drive-over decks' quirks. Useful for B2301 owners specifically doing this maintenance task, not a general review or buying guide.
Posted by the Huckabones Equipment channel, presented as hands-on operator instruction rather than a sales pitch.
Set cutting height to 1 inch or lower, lower the three-point hitch, remove the PTO shaft pins on each side, remove the front bracket pins, then drive the tractor forward off the deck.
Drive the tractor into position over the deck, lower the three-point hitch arms, pin each side, hook up the front bracket pin, connect the PTO shaft, then lock down the side wheels.
The B series comes with a choice of a 54 inch or 60 inch deck, and both come standard as drive-over decks.
The presenter says he personally does not enjoy drive-over decks because they tend to get run over in the wrong spots and can develop issues, though they are sturdy and easy to remove.
