Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on 50-hour service video from an owner doing his first oil change on his own BX2680 at 58.5 hours, not a dealer walkaround. It covers actual prices paid for oil and filters ($82.93 total), engine oil and filter swap, HST transmission filter replacement, fluid level checks, a filter-removal tool tip, and manual guidance on oil weight selection by climate. Best for owners preparing to do their own service.
Posted by an owner-operator documenting DIY maintenance on his own tractor, sharing personal experience rather than professional or dealership expertise.
The Kubota BX2680 takes 4.2 quarts of oil.
The owner used an old expandable filter wrench that fit the Kubota filter perfectly and removed it easily by hand with a ratchet and extension.
Per the Kubota manual, if temperatures fall below 14 degrees Fahrenheit, you can only use 10W30 oil.
Once the gasket touches metal, tighten the oil filter three quarters of a turn by hand; the HST filter only needs a half turn since it feels tight already.
| Kubota BX2380 | Kubota BX2680 | |
|---|---|---|
| PTO horsepower | 17.7 hp | 19.2 hp |
| Loader lift capacity | 1,407 lbf (LA344 pin-on); 1,286 lbf (LA344S quick attach) | 1,407 lbf (LA344 pin-on); 1,286 lbf (LA344S quick attach) |
| 3-point lift capacity | 1,213 lb | 1,213 lb |
| Hydraulic flow | 5.2 gpm | 5.2 gpm |
