Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A step-by-step installation walkthrough for the front-mount snow blower on the Bobcat CT1025 and CT1021, covering bumper removal, frame mounting with a 2x4 alignment tip, PTO hookup, color-coded hydraulic line connections, and the pin that secures the blower. It then reverses through removal in the same order. Practical and to the point, most useful for first-time installers who want to know the exact sequence before heading outside.
Posted by the Mifflintown Rental channel, suggesting a rental-business perspective focused on practical setup procedures.
Take the bumper off using a 24 millimeter wrench or socket, and save the bolts for reinstallation later.
Slide the frame underneath the track and use a 2x4 to help line it up before it starts taking the bolts.
The lines are color-coded to match the colors on the loader arm joystick control valve, so order must be correct or it will be backwards.
Start the tractor to relieve pressure, remove the pin, shut off tractor, wiggle joysticks, disconnect four lines, pull shaft off, then remove frame bolts.
