Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operator walking through the 50-hour engine oil and filter change on his own L4060, narrating every step in real time: draining the oil, pulling the filter, removing the side panel to access the fill point, managing fill quantity without knowing the exact capacity, and torquing the filter by feel. Practical and unhurried, it suits new L4060 owners doing their first oil service and wondering what to expect.
Posted by the Jeff B channel, which appears to be an owner sharing hands-on experience from his own property rather than a dealership or professional shop.
The owner uses filter HH164 32430, which is the filter the dealer calls out for the L4060.
You open the hood, remove a skirt held by two pins, then remove a side panel held on with a 12 millimeter socket to reach the oil filler cap.
The manual says tighten the filter by hand and an additional half turn only, since overtightening could displace the rubber seal.
The manual calls for 8.7 quarts, but the owner stopped near 8 quarts on the dipstick to avoid overfilling from residual oil.
