Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to, not a review: it walks through removing the hood/bonnet on Kubota L3901, L3301, and L2501 tractors step by step, hood latch, back bolt, headlight cable clip, hydraulic ram cotter pin, then lifting the hood off its rear slot. It's short and task-focused, useful mainly for owners doing maintenance who need hood access rather than shoppers evaluating the tractor.
Posted by the Broll Brothers channel, presented as a straightforward maintenance how-to with no stated dealer or ownership background.
Pop the hood latch on the right side, remove the back bolt, unclip and unplug the headlight cable, remove the cotter pin on the hydraulic ram, then lift the hood up out of the rear slot.
It is located on the right hand side of the tractor.
Yes, you need to remove the Christmas tree clip holding the headlight cable and then unplug the cable.
Yes, the same steps apply to the Kubota L3901, L3301, and L2501.
| Kubota L3301 | Kubota L2501 | |
|---|---|---|
| PTO horsepower | F (2WD gear), DT (4WD gear): 27.7 hp; HST (4WD): 26.2 hp | 19 hp |
| Loader lift capacity | LA525: 2,462 lbf (at bucket pivot pin) | 2,373 lbf (at pivot pin) |
| 3-point lift capacity | 1,874 lb (at lift points) | 1,918 lb |
| Hydraulic flow | 6.3 gpm | 5.15 gpm |
