Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership how-to walking through the complete loader removal and reinstallation process on the Mahindra eMax 20S, step by step: pulling frame pins, deploying kickstands, relieving hydraulic pressure before disconnecting the four color-coded lines, and driving back on to re-pin the frame. The reinstallation segment shows real-time alignment adjustments. Most useful to new eMax 20S owners doing this solo for the first time.
Produced by Mahindra of Greensburg, a dealership, so the content is instructional and product-supportive rather than independent.
Pull the cotter and lynch pins on each side, lower the loader onto kickstands, relieve hydraulic pressure, disconnect the four color coded lines, then back the tractor out.
Grab the loader valve control and move it in all four directions before disconnecting the hydraulic lines, since they are pressurized.
Pull the tractor forward so the top tube sits in the cradle, adjust by curling or lifting the bucket for clearance, then reinsert pins and lynch pins on both sides.
Lower the loader so the kickstands touch the ground before the bucket, keeping the bucket at a level angle.
