Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is part nine of a multi-part DIY install series adding 4th and 5th SCVs to a John Deere 4052R, picking up mid-project with the SCV already slid into place, wiring connections from the existing harness, torque specs on mounting bolts (23.5 ft-lb), and bolt/brace sizing details. It's a hands-on, in-progress mechanical log, not an overview, best suited to owners already doing this exact install and tracking the sequence.
Posted by the HubTime channel, appears to be an owner documenting their own DIY hydraulics install rather than a dealer or professional shop.
The bolts are torqued to 23 and a half ft-lb, though the installer put them on at 24.
The connection comes right out of the existing wiring harness, and the cables were already run up into the hole, so no extra routing was needed.
The brace uses three inch bolts and two and three quarter inch bolts, going by standard size, secured with lock nuts.
