Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, real-time walkthrough of an actual TYM 4820CH 50-hour service performed by an owner, not a dealer overview. It covers oil and filter change, front differential gear oil drain and refill, hydraulic filter replacement, greasing zerks (including a hard-to-reach one), and topping off hydraulic fluid using the sight glass. Useful for owners wanting a step-by-step reference for their own first service.
Posted by the fallenSkys Homesteading and Preparedness channel, run by a family doing their own tractor maintenance rather than industry professionals.
The front differential takes 1.69 gallons of gear oil, filled on one side at a time and checked against the dipstick mark.
Remove the old filter and gasket, put hydraulic oil on the new gasket, tighten by hand, mark it, turn to the mark, then back a quarter turn.
There is a zerk that requires reaching behind the tractor near the transmission range selector, which the owner says is hard to access.
Add hydraulic fluid through the fill point and check the level using the sight glass underneath, filling until it reaches the red dot mark.
