Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow DIY how-to, not a general tractor review: an owner swaps the stock H3 halogen headlight bulbs on a Mahindra Max 26XLT for aftermarket LED bulbs (about $34) because the roof-mounted light bar attracted bugs in summer. It walks through cutting the factory harness connector, butt-splicing and heat-shrinking the new bulbs, and reinstalling around the loader, roughly 30-60 minutes of work. Best for owners specifically wanting brighter, lower-draw headlights and comfortable doing basic wiring splices.
Hosted by Kyle, an owner doing the modification on his own Max 26XLT, with disclosed Amazon affiliate links for the parts he used.
No, the LED bulbs come with a blade connector but the Mahindra wiring harness is custom, so the connector has to be cut off and butt-spliced onto the new bulb wires instead.
The stock halogen bulbs are 35 watts each, while the replacement LED bulbs draw only about 8.5 watts, reducing overall power usage.
The owner says it took a half hour to an hour, with extra time lost after misplacing one of the small M3 by 4mm mounting screws.
