Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A first-timer removing the RCK60 mid-mount mower from a brand-new LX2610 in real time, with no prior experience and only a ten-second tip from the delivery driver. Shows the full removal sequence, pins, PTO quick-disconnect, three-point arms, and the overlooked link-stopper pin found in the manual, plus a quick grapple-to-bucket swap. Best for new LX2610 owners nervous about their first deck removal.
Posted by the Chasing Chickens Family Homestead channel, which appears to be a hobby-farm owner documenting their first experiences with new equipment.
Release the front bracket lever, raise the three-point arms, pull the PTO quick-disconnect coupler, then flip the rear bar and slide the deck out from under the tractor.
A roof ring cotter pin shown on page 30 of the manual. Pull it out so the link swings down, and remember to reinsert it when remounting the deck to avoid interference.
About five minutes, according to the owner, who had never done it before and only got a ten-second tip from the delivery driver.
No. The owner learned the hard way that hoses should not be attached or disconnected with the tractor running and pressure on the lines.
