Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real hands-on DIY session on a 4066R, not a talking-head overview: the owner removes front panels, drains and refills engine oil with a new filter, checks the oil pressure light on startup, then drains and refills the transmission/hydrostatic system (12.4 gallons) using a John Deere filter service cheat sheet with actual capacities. Good for owners planning to do this exact service themselves and wanting real step-by-step visuals.
Posted by the Gill Pecceu channel, an owner doing their own maintenance and narrating the process as they go.
Unplug the lights, then release four over-center clips, two on each side, and the panel pulls right out on its rails.
According to the John Deere filter cheat sheet, the transmission hydraulic system capacity is 12.4 gallons.
Watch the oil pressure indicator light on startup. It should blink briefly then go off within about 10 seconds.
The engine oil filter, plus the transmission suction filter and trans filter are all replaced during this service.
