Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on walkaround of the actual 50-hour service on an owner's own MX5400, filmed phone-in-hand while performing the work. It shows both drain plug locations, the copper washer detail, the oil filter swap, fill quantity (7.4-7.5 quarts of 15W40 Kubota oil), dipstick check, and both hydraulic/HST filter locations, plus a note to check the transmission sight glass afterward. Useful for owners about to do this exact service themselves.
Posted by an MX5400 owner performing routine maintenance on their own tractor, not a dealer or professional mechanic.
These tractors hold about 7.4 quarts, so fill with roughly 7 and a half quarts of 15W40 Kubota oil, then check the dipstick.
On the left side of the tractor under the oil pan there are two drain plugs. Pop both off to drain the pan, and watch for the copper washers on them.
One hydraulic filter is on the right side of the machine, and the other HST filter is on the left side under the stepboard or floorboard area.
Check the sight glass on the back of the transmission to see the fluid level, and top it off if you lost a lot of fluid during the filter swap.
