Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a straightforward, hands-on oil change walkthrough on a JD 3520 with the three-cylinder turbo diesel, filmed while actually doing the work: removing the old filter, pre-filling and installing the new one, wrestling the drain plug loose, refilling with a funnel, and checking level and leaks afterward. It's a quick practical how-to rather than a deep-dive or spec review, best for owners planning their own DIY oil change.
Posted by the Austin Does Stuff channel, which appears to cover general DIY maintenance on cars and tractors from an owner's hands-on perspective.
Untighten the old filter and remove it. Pre-fill the new filter with oil, coat the gasket with oil on your finger, then spin it on by hand until hand-tight plus, being careful not to cross-thread it.
If it will not budge, switch to a different tool and try approaching it from the other side, which makes it easier to break loose.
Crack the oil fill cap first to vent it, then use a funnel to pour oil in slowly, popping out the fill screen with a screwdriver if flow is too slow.
Fire the tractor up, check the dipstick for oil level, and inspect the drain plug area to make sure there is nothing leaking out.
