Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-time, hands-on engine oil change on a 2018 John Deere 3038E at 270 hours, done by an owner on his own machine. It covers popping the hood, locating the fill, filter, and drain plug, draining the old oil, swapping the filter (noting a filter-size discrepancy from forum info), refilling, and checking the dipstick. Good for owners wanting a step-by-step DIY reference, not a tractor overview or buying guide.
Posted by Adam Hamrick, an owner sharing a hands-on DIY maintenance video from his own tractor use.
This 2018 unit needed a 17, even though some forums said the year called for a 16, which did not fit.
Push the button to pop the hood, then spin the clip on the side panel, pull it forward and up to expose the oil fill, filter, and drain plug.
Leave the gasket up with a little oil on it so it doesn't tear going in and seals better, then tighten by hand.
Fill slightly over the full mark on the dipstick, since starting the engine and priming the oil filter brings the level down to correct.
