Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on DIY service walkthrough on a John Deere 2305, with Kevin explicitly noting the same steps apply to the 2210, 1023E, and 1025R. He changes hydrostatic fluid and filter, swaps the oil and air filter, replaces the battery, and points out common trouble spots (radiator screen clogging, frame-mounted vs three-point backhoes, diff lock location). Best suited to owners planning their own maintenance rather than shoppers wanting a walkaround or spec comparison.
An owner/former seller of these compact tractors sharing practical, experience-based maintenance tips from his own shop.
Kevin says these machines hold about 3.2 quarts with the small filter, or around 3.5 to 3.6 quarts with the bigger filter used on later models.
A screen near the radiator can plug up with dust multiple times a day if mowing dusty lots, causing overheating if not cleaned regularly.
No, Kevin says it must be frame-mounted since a three-point hitch backhoe hangs off the transmission and can crack or break the frame.
Kevin points out a pedal that locks the rear end for traction in mud; it stays unlocked normally so it does not tear up grass while mowing.
| John Deere 1025R | John Deere 1023E | |
|---|---|---|
| PTO horsepower | 18 hp | 16 hp |
| Loader lift capacity | Not Published | 120R: 1,823 lbf (at pivot point) |
| 3-point lift capacity | 1,177 lb | 1,177 lb |
| Hydraulic flow | 3.5 gpm | 3.5 gpm |
