Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full hands-on walkthrough of a complete service, not just the oil change: removing the side cover, replacing both fuel filters (water separator and canister style), draining and changing engine oil and filter, and pulling the hydraulic/transmission filters. It includes John Deere part numbers, torque-by-feel tips, and honest gripes about the awkward dipstick tube location. Best for owners doing this job themselves for the first time.
Posted by Papaw's Place, an owner sharing hands-on DIY maintenance from his own tractor rather than a dealer or professional mechanic.
Remove the side cover with 10mm wrenches, turn off the cutoff valve, drain the water separator filter, replace it and the canister style filter, then turn the valve back on and let the fuel pump refill them.
The oil filter John Deere number given is M806419, and the oil drain plug is removed with a 17 millimeter wrench.
The transcript states it should hold about five quarts to put it right on full.
With a front end loader installed, the dipstick tube opening is hidden down low and hard to see or find, making it difficult to insert the dipstick back in.
