Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Part 3 of a 50-hour service series, this video focuses specifically on draining and refilling the front axle gear oil on a Branson 2515H. The owner walks through locating both drain plugs and the dipstick, notes the axle came low from the factory, specifies 85W-140 gear oil at roughly six quarts, shares the O'Reilly's cost, and tips on keeping the crush washers. Useful for 2515H or similar Branson 15-series owners doing their own scheduled service.
An owner-operator documenting their own tractor maintenance, so expect candid first-hand observations rather than polished instruction.
85W-140 gear oil, with roughly six quarts needed to fill it back up to spec.
There is a drain plug on the right side and another on the left side, with the fill port and dipstick also on the left side.
The oil is thick and cold, so it drains and fills slowly, especially having to travel across to fill both sides.
A washer can fall off the drain plug while carrying the bucket, so check that it does not fall into the bucket and get lost.
