Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A practical pre-operation checklist walkthrough for the LS MT242H, presented by a staffer named Ashton Pierce. The video physically walks through each check point-by-point: hydraulic/powertrain fluid (with a useful loader-down tip), engine oil, front axle gear oil, fuel/water separator, coolant, radiator quick-screen cleaning, air filter, battery connections, and grease points. Straightforward and hands-on enough to be useful to a new MT242H owner learning the machine's specific dipstick and fill locations.
Posted by the TRACTORCITY channel, which appears to be a dealership or equipment retailer based on the branded name and sales-floor presentation style.
Check it at the back near the three-point arms, pulling the dipstick with the level indicator. The loader must be on the ground first or the rams hold fluid and the reading will be low.
On the right side of the tractor, at an angle below the oil filter, with a yellow cap handle. The fill point is a nearby orange cap under the hood.
It is a removable screen in front of the radiator that catches grass and debris. If the tractor overheats while mowing, you slide it out and clean it so the radiator can breathe.
The video recommends greasing all points, including the loader's grease points, every 8 to 10 hours, checking each time before use to avoid metal-on-metal friction.
