Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Fills a gap the creator himself noted: at time of filming, no other TYM T474 fuel filter replacement videos existed. It walks through the full procedure step by step, removing the loader, pulling the bezel (8x 10mm bolts), swapping the pre-filter (14mm bolts), freeing stuck hoses, installing the new filter, and bleeding the fuel system. Runtime is roughly 30-45 minutes of real work. Most useful to T474 owners doing this job for the first time.
An owner-operator sharing hands-on experience from their own T474, with no evident dealership or commercial affiliation.
Remove the loader, take off the bezel (8x 10mm bolts), remove the pre-filter (2x 14mm bolts), free the stuck hoses, install the new filter, reattach hoses, then bleed the fuel system using the bleed valve and ignition.
About a half hour to 45 minutes, counting the time to remove and reinstall the loader along with the filter swap itself.
No, the creator noted this was the first time removing the loader since buying the tractor in 2020, and it came off with no problem.
Loosen the small bleed valve, turn on the ignition so the electric fuel pump fills the system, then close the valve once fuel flows steadily and start the tractor.
