Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a straightforward oil-change walkthrough on a low-hour (154.4hr) 2013 John Deere 1023E, not a buyer's overview or feature tour. It shows draining the oil, swapping the filter (with specific part numbers), refilling with Shell Rotella T6 15W-40 to the correct 2.7-liter fill level, and a post-startup leak/level check. Useful for owners doing their own routine maintenance on this exact model; skip it if you want specs, performance, or a walkaround.
Posted by the 2StallGarage channel, appears to be an owner doing hands-on DIY maintenance rather than a dealer or reviewer.
The original filter was John Deere part M806418, and in this video it was replaced with an Amsoil EA15K12 filter.
It takes 2.7 liters of oil, which is just under a gallon, based on the fill level measured during this oil change.
Shell Rotella T6 Synthetic, a low consumption 15W-40 heavy duty diesel engine oil, was used for the refill.
A 17 millimeter socket was used to open the drain plug and let the oil drain out.
