Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-operated DIY install of OEM rear remotes on a TYM 4820, filmed step-by-step in a home shop. Lucas walks through fender and seat removal, bracket mounting, hydraulic connections, and the specific tools needed (mostly 12mm, 14mm, and 7/8-inch wrenches). The real value is his hard-won warnings: tighten the bracket before the RS binds, don't overtorque with an impact driver, and angle the hydraulic fittings clear of the three-point arms before you lift it. Best for TYM 4820 owners planning this exact retrofit.
A hobby homesteader owner-operator sharing a real install on their own tractor, mistakes and fixes included, no dealership affiliation evident.
Mostly 12mm and 14mm wrenches or sockets for the bracket and seat, plus two 7/8 inch wrenches to tighten the hydraulic hose fittings.
Tightening the bracket while it rubs against the RS, and overtightening bolts with an impact driver on a high setting, which can break or round them off.
The angled fittings may point outward and interfere with the three-point arm when lifted, risking a bent or kinked hydraulic line if not redirected.
