Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is an owner-orientation walkthrough rather than a buying review, it's aimed at someone who already has a T574 or T494 in their driveway. It covers loader attach/detach, quick-attach and drop-leg stabilizer procedures, regen process, dashboard controls, fuel-water separator and oil service points, three-point hitch and drawbar use, and rear remote hydraulics. Best suited to new owners learning their controls and maintenance points, not shoppers comparing specs or performance.
Posted by the SR1 Equipment channel, presented as a straightforward how-to/orientation guide rather than a sales pitch.
They are the same tractor except for the engine. The T574 has a 55 horsepower turbocharged four-cylinder Kioti diesel, while the T494 has a naturally aspirated four-cylinder 48.3 horsepower Kioti diesel engine.
Check the red rubber ring on the bottom of the fuel-water separator. If that ring is floating, it indicates water in the fuel, and you should shut the tractor off and drain it.
Raise the loader to waist height, lower and pin the drop leg stabilizers, lower the loader until pressure on the pins is relieved, remove the pins, then disconnect the hydraulic hoses after relieving pressure.
Park safely, set the parking brake, stop loader and PTO operation, set throttle to maximum, and press the regen button. The process can take between 20 and 40 minutes.
