Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, family-style walkthrough of replacing the primary fuel filter on a 1025R (nicknamed Johnny), showing the actual mess: draining fuel, cleaning gunk from the filter housing, reassembling, priming, and the rough first restart. It's a narrow, single-task video rather than a broader maintenance overview, useful mainly for owners specifically about to tackle this filter and wanting to see real gunk and priming steps.
Posted by Tractor Time with Tim, a hobbyist/family channel that frames DIY compact tractor maintenance as approachable and entertaining rather than expert-level instruction.
Turn off the fuel cock, loosen the filter housing with locking pliers, pull it down in one piece, clean out gunk, reassemble, then open the pet cock and prime with the fuel pump before starting.
The gunk shows the fuel filter is doing its job keeping debris out of the fuel supply; if gunk remains inside the housing, rinse it with a little diesel fuel and drain it out.
Yes, the transcript says a rough first start is expected since the fuel supply was cut off, and it is good that it started quickly and kept running.
No, wait until the fuel pump has filled the system back up and sounds normal before attempting to start the engine again.
