Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a step-by-step how-to on detaching and reattaching the KL7320 loader from a Kioti RX7320, not a review or walkaround. It covers dropping the loader stands, pulling the arm pins and cotter pins, disconnecting and color-coding hydraulic hoses, backing the tractor out, and the reverse reattachment process, including alignment tips to avoid forcing pins. Most useful for owners who already have this tractor and need a practical maintenance reference.
Posted by Nolt's Power Equipment, a dealership channel producing how-to maintenance content, so expect a practical instructional tone rather than an independent review.
Lower the loader stands on level ground, drop the loader onto the stands and bucket, remove the cotter pins and arm pins, raise the loader off the brackets, release hydraulic pressure, then disconnect and cap the hydraulic hoses before backing the tractor out.
Line the loader arms up straight with the tractor brackets, reconnect the color-coded hydraulic hoses, lower the loader arms into the mounting brackets, reinsert the arm pins and cotter pins, then raise the loader and stow the stands.
Color-coding ensures each hydraulic line gets reconnected to the correct spot so the loader works properly afterward, since not all dealers color-code the lines before delivery.
If the pin does not go in smoothly and you need a hammer or kicking to seat it, something is not lined up right, risking breakage, so make sure holes align first.
