Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →A dealership floor walkthrough comparing two same-horsepower LS tractors, the subcompact MT125H and the slightly larger MT225S, side by side. Covers loader lift capacity, PTO output, transmission range differences (two-range vs. three-range), hydraulic flow, and ergonomic control placement. Also shares specific March financing numbers for both models. Useful for shoppers trying to decide between these two LS sub-25-hp options, but expect a sales pitch throughout.
CSS Tractors is the channel for Construction Sales and Service, a dealership with locations in Florida and Alabama, so the video is explicitly sales-oriented.
The MT125 lifts about 1,008 lb on the loader, while the MT225S lifts about 1,067 lb, so they are very comparable in lift capacity.
The MT125 is a two-range tractor with low and high, while the MT225S is a three-range tractor with low, medium, and high for more work variation.
The MT225S has about 2.6 gallons per minute more pump flow than the MT125, even though both are the same horsepower.
The PTO capacity on the back of the MT125 is about 17.2 horsepower, with the tractor sitting at 24.7 horsepower overall.
| LS Tractor MT125 | LS Tractor MT225S | |
|---|---|---|
| PTO horsepower | 17.2 hp | 19.3 hp |
| Loader lift capacity | LL1001: 1,836 lb (at pivot pin) | LL2300: 2,290 lb; LL2001: 1,744 lb (at pivot pin) |
| 3-point lift capacity | 992 lb | 1,896 lb |
| Hydraulic flow | 4.6 gpm | 5.6 gpm |
