Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This one's narrowly focused on a single maintenance topic: the regeneration (regen) cycle on a Kubota MX6000/MX5400, explained by an owner who consulted his dealer and manual before doing it. It covers what the dashboard warning symbols mean, why you shouldn't interrupt the cycle, how long it takes (about 15 minutes), and how often it recurs (75-100 hours). No walkaround, no specs, no other maintenance topics covered.
An owner-operator podcast duo sharing a first-hand experience and dealer conversation rather than a professional or dealership tutorial.
A flashing signal appears on the dashboard indicating regen has started, and an RPM gauge signal tells you to raise engine speed until it stops, showing you are at the right point.
No. Interrupting it is risky because the cycle deposits and cools material into the exhaust system, and stopping it partway can damage the engine.
The dealer said 15 to 20 minutes, and the owner clocked his actual regen cycle at 15 minutes on the nose.
According to the owner, you shouldn't have to deal with another regen cycle for another 75 to 100 hours.
| Kubota MX6000 | Kubota MX5400 | |
|---|---|---|
| PTO horsepower | 51.8 hp | 46.5 hp |
| Loader lift capacity | 3,102 lbf | 3,102 lbf |
| 3-point lift capacity | 2,870 lb | 2,870 lb |
| Hydraulic flow | 9.5 gpm | 9.5 gpm |
