Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a step-by-step, hands-on walkthrough of removing and reinstalling the TX57 loader on a TYM T574, filmed by the owner on his own property. It covers folding down the parking legs, pulling the mounting pins, disconnecting hydraulic lines, and the reverse process, with practical tips on ground conditions, greasing pins, and using the bucket curl to pop the loader free. Useful for T574 owners doing this task themselves.
Posted by Matt, the owner-operator behind Firewood In The Field, sharing his own hands-on experience with his personal tractor.
Raise the loader, fold down the parking legs, lower it onto the stands, pull the mounting pins, then use the bucket curl and loader hydraulics to work the frame free before disconnecting the hoses.
Level, hard pack ground works best. The owner does it on gravel regularly without issues, though the loader can skid slightly on uneven ground.
Yes, move the loader joystick all around to make sure there is no residual pressure before popping off the quick disconnect hoses.
Drive the tractor forward slowly to line up the arm and cup, shut it off, connect the hoses, then use loader hydraulics to raise the arm into the cup and reinsert the pins.
