Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Focuses specifically on retrofitting a UHMW poly scraper bar onto a John Deere 54-inch snowblower to protect a blacktop driveway. The owner walks through removing the stock metal bar, cutting a matching 45-degree angle on the poly pieces, transferring and drilling holes, and countersinking nuts flush. Practical shop-level detail throughout. Best for 2025R owners considering the same upgrade who want to see the actual fabrication steps before committing.
An owner-operator documenting a DIY experiment on their own tractor, with no declared affiliation beyond sourcing the poly material from Good Works Tractors.
Remove the bolted-on metal bar, cut a 45-degree angle on the poly pieces to match, transfer and drill the bolt holes, then mount using the existing screws.
The owner has a blacktop driveway and wants to keep it from getting scratched up, having had success with poly on a plow blade for another John Deere tractor.
Use a 7/8 inch wood spade bit to drill the nuts below the surface, about an eighth to a quarter inch deep, then finish holes with a 5/16 drill.
