Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a full hands-on walkthrough of a hydraulic/transmission fluid and filter change on a 2015 John Deere 1025R, done by the owner on his own tractor. It covers draining the fluid, swapping the hydraulic filter, pulling and cleaning the PTO screen and magnet, refilling with the correct fluid amount, and checking for leaks afterward. Good fit for owners planning to do this service themselves.
Posted by the PovertyPointCustoms channel, an owner performing maintenance on his own 1025R rather than a dealer or professional shop.
The manual says 13 L but owners report it takes more. The video owner started with about 12 L, then added roughly 2.5 L more until the dipstick showed full.
You need a 13 mm socket for the drain bolt, a 6 mm Allen head for the PTO screen cover, and a drain pan to catch the fluid.
Slide the rubber hose up after loosening the clamps, remove the 6 mm Allen head bolt, pull out the screen and magnet, and clean off metal flakes before reinstalling.
Check the manufacture date printed on top of the filter. In this video it read February 17, 2015, suggesting it was the original filter still installed.
