Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on, real-time walkthrough of swapping attachments on a Kubota BX1860: pulling pins to detach the mower deck, then mounting the snow plow, adjusting mounting bars and belt tension, hooking up hydraulic hoses, and setting plow ground clearance using washer spacers. The audio is rough and narration is choppy, but the actual mechanical steps are shown step by step. Best suited for BX1860 owners who already have both attachments and want to see the pin/lever locations demonstrated rather than explained in words.
Appears to be an owner filming their own tractor work in their driveway, not a dealer or produced instructional channel.
Pull the pin out, turn it sideways to lock it, lifting up on the deck at the same time, then repeat the same step on the other side.
Using a 13 millimeter wrench, loosen the nut so the belt is nice and loose for winter, then reverse the process to hook it back up.
There is a series of washers top and bottom. Removing them from the bottom and adding to the top raises the plow, and flipping the order changes clearance, set at about three-quarters of an inch off the ground.
Run the hose on the end of the loop, then connect using the color-coded yellow fitting, making sure it is open and pushed down before driving the tractor into the mount.
