Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →Ted from Everything Attachments walks through setting up and running a two-bottom, 12-inch moldboard plow in real conditions, including first-pass leveling, in-furrow tractor positioning, and adding disc coulters to handle wire grass and vines. He also explains tractor weight versus horsepower tradeoffs and when a gauge wheel is useful. Best for someone new to moldboard plowing who wants practical setup guidance rather than a spec overview.
Posted by the EverythingAttachments channel, which appears to be an implement retailer or dealer, so the content is instructional but likely aligned with selling their own equipment.
Adjust the front and back of the plow, then once the tractor runs in the furrow on later passes, readjust since the offset pin gives room to level it again.
Add disc coulters, which are two sharp discs that slice the ground and weeds before they reach the moldboard, preventing wadding on the beam.
Yes, an older tractor with less horsepower but more weight can still pull a two-bottom plow with no problem for garden use.
If your tractor has an up or down lift instead of a position lift, you let the plow down to the gauge wheel so it runs on the ground without needing lift adjustments.
