Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a short, focused repair clip on a John Deere 4300 (32hp, 2001 model) that wouldn't start due to a bad fuel solenoid. It shows the actual diagnostic symptom (no click when the key turns), the three-lead disconnect and two-bolt removal process, and confirms the fix by demonstrating the solenoid click and successful startup after replacement. Good for owners troubleshooting a no-start/no-click condition on this model, not a broader maintenance overview.
Posted by the True Stuff channel, which appears to document hands-on repair work rather than sell or review tractors.
The video shows this was caused by a bad fuel solenoid, which normally clicks and lets fuel get to where it needs to go so the tractor can start.
Disconnect the three lead connections, remove the two bolts holding the solenoid, then install the replacement solenoid and reconnect the leads and bolts.
If you turn the key and don't hear the solenoid click, the video says it's more likely that the solenoid is bad.
