Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real-world electrical diagnosis, not a review or walkaround: a 2012 5055E suddenly had no dash lights, no sounds, and wouldn't crank, despite a good battery. The owner walks through ruling out the battery and starter, testing the ignition switch and fuse box, and finally finds a burned-into positive wire behind the fuse panel. Most useful for 5055E owners troubleshooting a no-power-to-ignition-switch fault.
Posted by the Jack F channel, an owner sharing a hands-on troubleshooting experience from his own tractor rather than a dealer or professional technician.
The battery and starter tested fine with 12.6 volts, so the no-dash-lights issue was a wiring problem, not a battery or starter failure.
A positive wire behind the fuse panel, coming off the starter side of the main ignition switch fuse, had burned into and lost connection.
Pull the fuse box out and check the wires on the back side, since a burned-into positive wire there caused this exact symptom.
