Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →An owner-shot DIY walkthrough of the engine oil change portion of a 50-hour service on a Branson 2515H. It covers drain plug location (17mm, yellow), oil quantity (roughly six quarts), pre-filling the filter, hand-tightening tips, using an extender funnel for the tight fill port, and checking the dipstick after a brief startup. Part of a multi-part series; useful for first-time 2515H owners doing this job themselves.
An owner-operator documenting maintenance on his own Branson 2515H, with no apparent commercial or dealer affiliation evident in the transcript.
The drain plug is 17 millimeters and is painted yellow, located underneath the engine right above a bar, making it easy to identify.
The video states you need a gallon and a quart, roughly six quarts of heavy duty diesel oil.
No, screw the new filter on tight by hand only after smearing oil on the seal, do not use a wrench or tool.
Because the fill hole is tight, use an extender funnel to reach down into the filler hole, then remove it before starting the engine since gears are nearby.
