Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a real hands-on fuel filter change on a Kubota B2650 during its 100-hour service, not a talking-head overview. The owner removes the fuel bowl, pulls the filter element with a screwdriver, installs the new filter and gaskets, then bleeds the fuel system per the manual and runs the engine to check for leaks. Messy, unscripted, and detailed enough for owners doing this exact job themselves.
Posted by the Matt's need for speed channel, an owner working on his own tractor rather than a dealer or professional mechanic.
Make sure the tank is less than half full, remove the fuel bowl by unscrewing it, pry out the old filter element with a flathead screwdriver, install the new filter and gaskets, then reattach the bowl.
Fill the fuel tank, start the engine, run it for thirty seconds, then stop the engine and check for leaks.
The manual says it can be rinsed, but the owner chose to replace it with a new filter since it only cost 15 dollars.
