Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a narrow how-to focused entirely on removing a 62-inch subframe snow plow from a Mahindra Max 24, not a review or overview of the tractor itself. It walks through pulling the linchpins separating blade from subframe, disconnecting hydraulic lines, freeing the rear subframe pin, and popping the front subframe loose, with practical tips like leaving the kickstand down. Best for Max 24 owners already running this plow setup who need step-by-step removal guidance.
Appears to be an owner or operator demonstrating a maintenance task on their own equipment, not a dealership sales video.
Lift the plow to relieve pin pressure, pull the two linchpins joining blade to subframe, disconnect the hydraulic lines, remove the rear subframe pin, then pop the front subframe loose.
Yes, keep the kickstand in the down position so the plow blade stands freely once it is separated from the subframe.
Wiggle the loader control in all directions to bleed the lines, then undo the top yellow line and the red line below it to remove them from the plow.
