Pick a make and model. Full spec sheet, owner videos, and similar tractors on one page.
Find a model →Pit up to four models against each other. Engine, hydraulics, hitch, weight, warranty.
Open comparison →Written guides on choosing tractors, hydraulics, PTO, hitches, and maintenance.
Read articles →This is a hands-on oil and filter change on a real 2011 Kubota B2920, filmed from underneath the tractor on a creeper. It covers removing the hood and fenders, locating both 18mm drain bolts, draining roughly 3.7 quarts, swapping the filter with fresh oil on the O-ring, and refilling while checking the dipstick. Useful for owners doing their own routine maintenance on this model.
Posted by the Zukiplay Reviews channel, appears to be an owner walking through DIY maintenance on their own tractor rather than a dealer or professional shop.
About 3.7 quarts, almost a gallon, drains out once both 18mm drain bolts are removed.
Both drain bolts are 18 millimeter, located side by side underneath the tractor.
The owner used Rotella T Shell oil in 10W30, which is what the tractor called for.
Turn the latch left and raise the hood until it catches, then lift and tilt each fender forward and pull it out from its seating pins.
